Dragonfly 1000

Standard Specification List

Constructed by experienced craftsmen using hand-laid fiberglass of high quality ISO-polyester resin.

• Strong, light weight sandwich construction using an *Airex PVC foam core. (*Airex is a closed-cell Swiss product well known by the best boat builders.).
• All stress points are reinforced with uni-directional fiberglass.
• 18HP inboard Volvo MD 2020 3-cylinder Diesel engine (Fresh water - cooled), installed complete with Gori 2-bladed folding propeller.
• 55 Liter (14.5 gallon) stainless fuel tank.
• 100 Liter (27 gallon) fresh water tank.
• Self-draining cockpit.
• Contrasting non-skid gelcoat.
• Kick-up rudder with tension release cleat and up/down haul.
• Kick-up centerboard with up/down haul and tension release cleat.
• 2 burner Wallas Seaflame ceramic stove - kerosene with own exhaust. Optional.
• Stainless steel galley sink with pressurized hot and cold water.
• Wash basin in head.
• Marine head (holding tank extra).
• Complete electrical installation with custom indicator control panel including battery level and triple master switch.
• 3 maintenance free batteries.
• Bow and stern navigation lights.
• 4 trampoline nettings, white UV protected, non skid with adjustable tension.
• 4 heavy duty stainless steel Andersen two speed self-tailing winches (#28ST).
• 2 heavy duty stainless steel Andersen two-speed self-tailing winches (#46ST).
• 4 large mooring cleats.
• Frederiksen racing quality ball bearing blocks.
• Frederiksen main sheet/traveler system - custom built into cockpit coaming.
• Frederiksen genoa car system.
• Frederiksen batten car system.
• 2 Frederiksen 4-part tackle backstays.
• All lines lead under-deck into cockpit through Easylock MIDI rope clutches 8 on cabin roof (4 starboard, 4 port), 4 in cockpit (2 starboard, 2 port).
• Custom Andersen stainless hardware.
• Instrument panel with high polish aluminum mounting plate.
• Whitlock steering wheel with direct steering for a well-balanced Dragonfly.
• Silva 125 compass and light mounted on steering column.
• Kevlar main and spinnaker halyards.
• Wing Profile 2-spreader fixed aluminum mast - height 13.5m (44.5 ft).
• Boom with 2 reefs (continuous lines run under deck through boom for single line jiffy reef).
• Roller furling jib with below deck drum mounting.
• 3 lowline moonlight hatches made by Sophus Berendsen on deck top.
• 8 tinted Plexiglas windows mounted in sealed aluminum frames w/curtains.
• Large flush anchor well.
• Stainless steel guide rails on cabin roof.
• Stainless steel bow pulpit.
• Full-batten mainsail (Dacron/racing quality) made by Elvstrom Sails w/3 reef points, 7 battens, in an 8.5 oz and boom with 2 reefs.
• Mainsail cover - quality constructed by Elvstrom Sails.
• Roller-furling genoa made of mylar/dacron with two vertical- batten reefs by Elvstrom Sails.
• Fixed permanent cockpit windshield.
• Cockpit seats made of quality teak wood w/built in storage.
• Cabin lighting: 12 lights - 6 cabin ceiling halogen lights with dimmer control, 2 flush mounted lights over cabin windows w/dimmer control, 2 halogen lights in forward cabin, 1 in enclosed head, 1 in galley.
• Cabin interior furnished in teakwood - Danish cabinetry and storage closets hand crafted with elegant lines and sculptured contours.
• Interior upholstered wool cushions (in wide range of colors).
• Flooring - teak and holly (or carpeting).
• Swing Wing system reducing beam from 25' to 12'6".
• Sleek sliding cabin entrance doors made of tinted acrylic.
• Large enclosed forward cabin with double V-berth and center attachment to increase sleeping space. Includes privacy enclosure.
• Enclosed head with storage cabinets, sink, mirror.
• 1 Double and 1 single fold-out berth in main cabin.
• Large teak salon table.
• Pressurized salt water pump in galley.